“May the favor of the Lord our God rest on us; establish the work of our hands for us — yes, establish the work of our hands.” — Psalm 90:17 (NIV)

Mon–Fri 8–5 · Sat 8 AM–2 PM · Closed Sundays

FAQ

Rooster Electric — Questions & Straight Answers

Generated from the same facts that power Google’s answers about Rooster Electric — our services, our prices, and how we work. If your question is not here, call (916) 235-3596.

Prices and quotes

How much does a panel upgrade cost in the Sacramento area?

Most 200-amp panel upgrades and replacements we do run $4,725–$6,825. That is a rough, typical range only, and your home’s actual price can fall outside it. The number depends on amperage, overhead vs. underground service, trenching and stucco repair, and your utility’s requirements. Your written price is set after a photo review or a visit — and once quoted, it does not change without your approval.

Are your estimates free?

No — and we would rather be straight about that than advertise “free” and bury the cost somewhere else. Troubleshooting visits carry a diagnostic fee of $149–$249 depending on location, quoted up front. If you hire us for the repair, that fee can be credited toward the job depending on the scope. For straightforward installs like panels and EV chargers, we publish our price ranges right on this site and confirm your exact written price after a photo review or a visit.

How much does an EV charger installation cost?

EV charger installation typically runs $1,379–$2,900 depending on distance from your panel — a rough range your home’s actual price can fall outside. Longer runs, wall and attic access, and panel capacity move a job within the range. Rooster Electric runs a load calculation on every EV job, and where load management can safely avoid a panel upgrade, we will offer it instead of selling you the bigger job.

How much does a standby generator cost?

Standby generators are the biggest-ticket work we do. A Generac whole-home install typically budgets $18,000–$30,000 depending on generator size, gas line work, and how much of the home it backs up. If that number is more than the job needs, a portable generator inlet with an interlock runs $900–$3,500 and covers your essentials — lights, refrigerator, furnace fan, and key outlets — for a fraction of the cost. We size to your actual load and tell you honestly which route fits.

Do you offer financing or payment plans?

Our standard terms: smaller jobs are a deposit, then the balance when the work is complete. Bigger permitted jobs run 10% deposit, 25% at city/county and utility approval, 55% when work starts, and the final 10% after final inspections pass. We also offer a Rooster Electric Annual Service Plan — $23/month or $259/year — that covers a yearly whole-home safety inspection, priority scheduling, no after-hours emergency trip fee, and 10% off repair labor.

Panels

Which electrical panels are unsafe or a fire risk?

The three we replace most are Zinsco (also sold as Sylvania-Zinsco), Federal Pacific Stab-Lok, and Challenger panels. Their breakers are documented to fail to trip, overheat, and in some cases melt to the bus bar — which means the protection you are counting on may not work when it matters. Certain older Pushmatic panels raise similar concerns. If one of these is on your wall, replacement is the fix — not another repair. We photograph what we find and show you before recommending anything.

How do I know if I need a panel upgrade?

The common signs: breakers that trip often or will not reset, lights that flicker when an appliance starts, a panel that is warm, buzzing, or rusted, fuses instead of breakers, or no open slots when you want to add a circuit. You also need one when an insurer, lender, or home sale flags your panel, or when a new load — an EV charger, hot tub, or addition — exceeds what a 100-amp panel can safely carry. We check capacity with a real load calculation before recommending an upgrade, and if a smaller fix is the honest answer, that is what we will tell you.

Do you handle the permit and inspections?

Yes — every permitted job includes permit and inspection handling. We pull the permit with your city or county, coordinate with your utility (SMUD, Roseville Electric, or PG&E) where a service disconnect or meter release is involved, schedule the inspection, and see it through the final inspection. It is built into our panel and EV pricing, and it is a big part of what you are paying for: permitted, inspected work protects you at resale and with your insurer.

How long does a panel replacement take?

The on-site swap itself usually takes about a day, including the utility disconnect and reconnect. The full timeline is longer: permit and utility approvals come first, which can take days to a few weeks depending on the city and the utility’s schedule. We handle that coordination, keep you posted at each step, and once approvals land we schedule the work day with you. Your power is off during the swap itself — plan on most of that working day.

EV chargers and generators

Can I charge an EV on a 100-amp panel?

Often, yes. California code (CEC 220.57/220.83) lets us add an EV charger to a 100-amp service when a load calculation shows the capacity is there — and Rooster Electric runs that calculation on every EV job. When the math is tight, a listed load-management device can pause charging when your home is drawing heavily, which safely avoids a panel upgrade in many homes. If the numbers honestly do not work, we will show you the calculation and price the upgrade alongside the charger.

What is the Annual Service Plan?

The Rooster Electric Annual Service Plan is $23/month or $259/year and includes one visit per year until canceled: a whole-home electrical safety inspection. Members also get priority scheduling, no after-hours emergency trip fee, and 10% off repair labor. The discount excludes panel replacements and upgrades, EV installs, battery backup, and other new installs — we would rather state that plainly here than surprise you later. It is a good fit for older homes where a yearly once-over catches problems while they are still small.

What is a generator interlock, and is it legal in California?

An interlock is a listed mechanical plate on your panel that makes it physically impossible for your main breaker and your generator breaker to be on at the same time — so generator power can never backfeed the utility lines and endanger a lineworker. Yes, it is legal in California when installed with listed equipment under permit, which is how Rooster Electric does it. An inlet-and-interlock install runs $900–$3,500 and lets a portable generator safely power your essentials through your existing panel.

Working with us

What areas do you serve?

Rooster Electric is based in Citrus Heights and serves the Greater Sacramento area, with panel work concentrated in our core cities: Citrus Heights, Roseville, Fair Oaks, Orangevale, Carmichael, and Rancho Cordova. We also serve Sacramento, Folsom, Rocklin, Elk Grove, and Lincoln, and we travel for generator work in Placerville, Auburn, Grass Valley, and Truckee — Truckee standby-generator installs are a specialty of ours. Not sure if you are in range? Call and ask — we will tell you straight.

Are you licensed and insured?

Yes. Rooster Electric Co holds California CSLB C-10 electrical contractor license #1122582, and we are licensed and insured. We pull permits on the work that requires them and warranty our labor for 10 years — one of the longest workmanship warranties in the area. When you are comparing electricians, ask every one of them for a license number and check it on the CSLB website; ours is printed on every page of this site because we are glad to have you verify it.

What warranty do you offer?

Our standard warranty is a 10-year workmanship (labor) warranty — if something we installed fails because of how we installed it, we make it right. Equipment carries its manufacturer warranty on top of that (Generac and FranklinWH systems, for example, carry their own manufacturer coverage, and we are a certified installer for both). Some projects carry a different warranty term — higher or lower — and when that is the case it is stated on your estimate up front, not buried in fine print.

About Rooster Electric

Why is Rooster Electric closed on Sundays?

Rooster Electric is a Christian-owned company, and we close on Sundays — for worship, rest, and family. It is core to who we are, not a scheduling quirk. Requests that come in on a Sunday are answered first thing Monday, and our Annual Service Plan members never pay an after-hours emergency trip fee. “Built by faith” is how we run the business: honest prices, permits pulled, and work done as if for the Lord.

How do I get a quote?

Three ways. Call (916) 235-3596 and talk to Lucas or Caitlynn in the office. Send a quote request and your details land directly in our system with an immediate notification to our office. Or, for EV chargers, email photos of your panel and the charger location — most EV quotes are handled virtually with no in-person visit needed. Nothing here books you onto a calendar: scheduling is done personally by our office, never by an online time-slot picker.

Related