“May the favor of the Lord our God rest on us; establish the work of our hands for us — yes, establish the work of our hands.” — Psalm 90:17 (NIV)

Mon–Fri 8–5 · Sat 8 AM–2 PM · Closed Sundays

A Rooster Electric electrician in a logo shirt installing a new electrical panel

Panel Upgrades in Rancho Cordova, CA

Panel Upgrades in Rancho Cordova, CA

Panel upgrades and replacements are Rooster Electric’s specialty — and Rancho Cordova is full of the homes that need them: 100-amp panels from the building-boom decades, including the Zinsco, Federal Pacific, and Challenger panels insurers keep flagging.

Typical price in Rancho Cordova: $4,725–$6,825 for most 200A upgrades — a rough, typical range only, and a home’s actual price can fall outside it. Permit, utility coordination, and inspections are included, with a 10-year workmanship warranty. Estimates, not quotes — your written price is confirmed after a photo review or a visit.

How panel work runs in Rancho Cordova

Rancho Cordova pairs City of Rancho Cordova permits with SMUD power. The deep stock of 1960s–70s ranch homes off Mather and along Folsom Blvd is exactly the housing this page exists for: 100A panels, problem brands, and homeowners told they need 'a whole new service' when a same-spot 200A replacement usually does it.

Keeping the panel in place is what holds Rancho Cordova ranch-home jobs at the low end of the range — and in this housing stock, it usually works. Anatolia and Sunridge homes skew newer, with EV capacity questions instead.

The known-risk brands we replace here

  • Zinsco (also Sylvania-Zinsco) — breakers documented to melt to the bus bar and fail to trip.
  • Federal Pacific Stab-Lok — breakers that can fail to trip on overload; a known insurance flag.
  • Challenger — breakers and bus connections prone to overheating.

If one of these is on your wall, we photograph what we find and show you — the fix is replacement, and we will walk you through the options before you commit to anything.

How the job goes

  1. Send panel photos or book a site visit — we confirm panel, service type, and siding
  2. Written price confirmed before anything is scheduled
  3. We file the permit and utility application
  4. Install day: power off, panel swapped, power restored same day in most cases
  5. City inspection and utility meter release to close it out

Recent panel jobs near Rancho Cordova

Rooster Electric Co on Google: 5.0 ★ · 150+ reviews

Panel upgrade (MPU)

Rancho Cordova · Oct 2026

Main panel upgrade in Rancho Cordova with SMUD coordination, permitted and inspected.

Rated 5 out of 5 stars

Panel questions — Rancho Cordova

How much does a panel upgrade cost in Rancho Cordova?

Typically $4,725–$6,825 for 200A, including city permit and SMUD coordination. That’s a rough, typical range only — your home’s actual price can fall outside it. Same-spot replacements on the older ranch stock usually land at the low end.

Can I add an EV charger instead of upgrading my Rancho Cordova panel?

Sometimes — a load calculation decides. If load management carries the charger safely on your 100A service, we quote that instead and you keep the difference.

Who handles the permit and SMUD in Rancho Cordova?

Rooster Electric — City of Rancho Cordova permit, SMUD approval and meter release, and final inspection, all in the job price.

What does a panel upgrade cost with Rooster Electric?

A typical 200-amp panel upgrade with Rooster Electric runs roughly $4,725–$6,825. That is a rough, typical range, not a guarantee — your home’s actual price can fall outside it. Whether your service is overhead or underground, what your utility requires, and whether the panel can stay where it is all move the number. This is an estimate, not a quote: send clear panel photos or book a look in person and you get an exact price in writing — permit included, no surprises added later.

My panel says Zinsco, Federal Pacific, or Challenger. Can you replace it?

Yes, and it is some of the most common work we do. These brands have breakers documented to fail to trip, which is why insurers and home inspectors flag them. We swap them for a modern, code-compliant panel, permitted and inspected, and coordinate the utility side for you.

Who deals with my city and my utility on a panel job?

Rooster Electric does, start to finish. We file the city or county permit, work through SMUD, Roseville Electric, or PG&E approval and meter release, and schedule the final inspection — it is all one contract, so nothing stalls between offices on your time.

How long am I without power during a panel replacement?

Only while the swap itself is happening — for most homes that is part of one working day, with power back the same day. The longer part is lining up the permit and utility dates first, and we confirm your install day once the utility date is set.

Do I need to be home for the final panel inspection?

Yes — plan to be there to let the inspector in for a short visit to the panel or garage. We will not be on site for that final inspection, which is standard on these jobs. We send the permit ahead for you to print and keep with the panel.

Get your Rancho Cordova panel priced

Send a photo of your panel with the door open, or call (916) 235-3596 — most Rancho Cordova panel prices are confirmed from photos, in writing.