What Electrical Work Costs Around Sacramento
Short answer: A panel upgrade typically runs $4,725–$6,825, an EV charger runs $1,379–$2,900 by distance, a portable generator inlet runs $900–$3,500, and a standby generator budgets $18,000–$30,000. Every number below is a real Rooster Electric range, published on purpose.
Please read this first: everything on this page is an estimate, not a quote. Your home’s actual price can fall outside these ranges. A written price comes after a photo review or a visit — and once it’s quoted, it never changes without your approval.
| Service | Typical price | What’s included / notes |
|---|---|---|
| Panel upgrade / replacement | Typically $4,725–$6,825 | Includes permit & inspection handling and utility coordination. Zinsco/Federal Pacific/Challenger swaps included. |
| EV charger — hardwired | $1,379–$2,900 | Priced by distance from the panel. Load calculation and permit included. |
| EV charger — 14-50 plug-in | $1,519–$2,900 | Priced by distance from the panel. Outlet, breaker, permit. |
| EV charger — longer run (50 ft +) | From $2,900 | Priced by distance and access. |
| Standby generator (Generac) | $18,000–$30,000 | Budget range. Certified Generac installer; sized by a design visit. |
| Portable generator inlet + interlock | $900–$3,500 | Listed interlock kit, inlet box, permit. |
| Battery backup (FranklinWH) | Quoted per home | Depends on capacity and which circuits get backed up. |
| Troubleshooting / diagnostic visit | $149–$249 | By location. Can be credited toward the repair if you hire us. |
| Rooster Electric Annual Service Plan | $23/mo or $259/yr | Yearly inspection, priority scheduling, no after-hours trip fee, 10% off repair labor (installs excluded). |
Pricing checked October 2026 against Rooster Electric’s current pricing. Ranges are typical for Greater Sacramento homes; permitting rules and utility requirements vary by city and are built into the estimate.
What usually keeps a price at the low end
- Same amperage, same location — a like-for-like panel swap
- Panel close to where the EV charger goes (short, simple run)
- Good attic or crawl access for new wiring
- Overhead service with clear working room
- One permit, one utility, straightforward approval
What usually pushes a price up
- Stepping up in amperage (100A to 200A) or relocating the panel
- Underground service, trenching, or stucco repair
- Long EV runs, finished walls, or conduit work
- A panel brand or condition the utility flags for extra steps
- Load problems that need load management or an upgrade first
What’s built into a Rooster Electric price
- Permit pulled and inspections handled
- Utility coordination where the job needs it (SMUD, Roseville Electric, PG&E)
- Licensed C-10 electricians — no unlicensed subs
- 10-year workmanship warranty
- One written price — no surprise add-ons after we start
The service plan, priced plainly
The Annual Service Plan is $23/month or $259/year: one yearly safety inspection visit, priority scheduling, no after-hours emergency trip fee, and 10% off repair labor. The discount deliberately excludes panel replacements and upgrades, EV installs, battery backup, and other new installs — read the plan page for the straight version.
Rebates, stated honestly
SMUD offers EV customers a rebate (usually $750) that is applied as a customer discount; Rooster Electric’s job total is the pre-discount figure because SMUD sends the rebate to us directly. Utility and manufacturer offers change — we will tell you what is current when we quote, and we never build a quote on a rebate you might not get.
Cost questions
How much does a 200A panel upgrade cost near Sacramento?
Typically $4,725–$6,825 with Rooster Electric, including permit, utility coordination, and inspection. That is a rough, typical range only — your home’s actual price can fall outside it. Same-spot replacements on wood siding land at the low end; stucco, trenching, or moving the panel can push a job higher, and some homes land outside the range altogether.
How much does it cost to install a Tesla charger at home?
$1,379–$2,900 depending on distance from your panel. Longer runs cost more — a permitted run up to 50 ft can reach $2,900. Distance is the main driver.
How much is a whole-home Generac generator?
Typically $18,000–$30,000 installed, depending on size, gas run, and placement. Standby quotes come from an on-site design visit.
Is there a cheaper way to back up power?
Yes — a portable generator inlet with an interlock kit runs $900–$3,500 and covers essentials like fridge, lights, and a well pump.
Do EV charger installs need a permit?
In most of our cities, yes, and a load calculation is always required for EV work. Both are included in our install price.
Are there rebates for EV chargers or panels?
SMUD and Roseville Electric have offered incentives that change with funding. We check what's live for your address when we confirm your price.
Reminder: the figures on this page are estimates, not quotes. Your written price is confirmed after a photo review or a visit, and it never changes without your approval.
Want your home’s actual number?
Send panel photos or call (916) 235-3596 — most panel and EV prices are confirmed from photos, in writing.
